ASSESSMENT 2: Trends in development of modern housing

UO Building 1
ASSESSMENT 2:
PROJECT
This exercise contributes to 40% of the whole course grade.
AIMS:
The purpose of this evaluation is designed to supply college students with an appreciation and document of the wall and roof
design and erection processes concerned in developing a typical domestic-scale wall and roof. The train shall be
consultant of the precise work undertaken on web site – though to a a lot smaller scale of course.
COURSE OBJECTIVES:
It’s useful to familiarise your self with the connection between the exercise and the course aims.
• CO1. Define the assorted developments in development of modern housing.
• CO2. Determine the present work practices of residential constructing corporations.
• CO3. Determine the principal elements of single storey home building.
• CO4. Display an understanding of the constructing rules and requirements.
• CO5. Clarify the sequencing and coordination of constructing parts.
ASSESSMENT SUMMARY:
COMPONENTS COURSE
OBJECTIVES
WEIGHTING
% of course
complete
DUE DATE INDIVIDUAL
OR PAIRS
DETAILS SUBMISSION
PROCESS
Half A:
Building of
Wall and Roof
Mannequin and Half
B: Works
Schedule
CO Three & 5 40% Week 7 Particular person Half A:
Minimal of
10 photos
plus
annotated
labelling Half
B: Desk
format (no
phrase restrict)
MS Phrase file
(.docx or .doc)
by way of
Learnonline
ASSESSMENT DESCRIPTION
You’ll work individually on this mission, to assemble a wall and roof mannequin Half A: Building of a wall and roof
mannequin. Additionally, you will be accountable to take care of and doc a piece schedule and log all important sides of the
mission processes, as you construct the mannequin (Half B: Work schedule).
An Evaluation 1 Half A & B Dialogue Discussion board shall be optionally out there to make use of so that you can take part in dialogue
along with your cohort. It is possible for you to to make use of this discussion board particularly to debate any challenges that you’re going through whereas
developing the mannequin. The educating group and your fellow friends will be capable of help you in this discussion board. The extra
questions and pictures posted and mentioned, the higher the training for everybody.
PART A: CONSTRUCT A WALL AND ROOF MODEL (30%)
You’re required to assemble a wall and roof mannequin.
Evaluation shall be based mostly upon consistency to the plans, depicting the related roof building and wall body and
their correct placement and neatness of presentation.
UO Building 1
The plans supplied on the be taught on-line course web site, embody a truss roof body, exhibiting a “hip and valley” roof. Choose
one to be constructed.
The mannequin shall present all members of the roof and ceiling framing, together with bracing and a portion of the roof battens
and masking, sarking, ceiling materials, insulation, and eaves element. Not all the home roof framing must be
undertaken, simply sufficient to adequately describe the hip and valley created from an L-shape portion of the home
plan.
The mannequin shall present a minimum of one full size of the wall. All of the elements of a wall body must be proven
together with bracing. Not all of the wall framing must be undertaken, simply sufficient to adequately describe the everyday
members of a wall. Bear in mind you’ll need to supply partitions to assist the remainder of the roof body mannequin. These
partitions will be strong wall, used for the rest of the mannequin.
Assemble the wall and roof mannequin from balsa wooden or related materials, angle reduce to the sections to size and
as shut as doable to the scaled dimension of the precise members in the home wall and roof design. The roof shall be
positioned on a supporting run of partitions constituted of foam board, ‘Masonite’ or related (apart from the wall that’s constructed
as per a typical home wall body).
The entire mannequin shall be mounted on a secure sheet base. Embody your identify on the bottom in order it’s seen when
taking your images.
The submission of your mannequin shall be on-line so contemplate rigorously documenting and depicting your full
mannequin. A minimal of 10 images offered professionally in a phrase doc that gives an in depth view of
your mannequin with clear labelling of key elements and members of the wall and roof body.
PART B: WORKS SCHEDULE (10%)
You’re additionally required to create a works schedule that describes key levels of the development course of. It’s anticipated
that the works schedule will element the duties concerned in finishing the primary levels in your construct,
length/estimates, exhibiting how lengthy every of these duties took and supplies/sources, detailing the supplies and
sources concerned. It’s advised to convey this data professionally in desk format.
GUIDE TO CONSTRUCTION OF A WALL AND ROOF MODEL
PLEASE READ THE FOLLOWING AS A GUIDE THAT ACCOMPANIES THE WALL AND ROOF MODEL ASSESSMENT TASK DESCRIPTION.
This information gives data that you could be discover helpful to assemble your mannequin in addition to particulars of the place the
supplies will be bought. It’s a GUIDE solely…
• A advised scale is 1:20, 1:25, 1:30 or 1:40.
• The constructing platform will be 5mm-6mm thick by 650mm X 450mm (approx.) plastic board, i.e. skinny sort
webbing between the highest and backside (like cardboard). The identical or related cardboard could also be used to make
the partitions of the constructing (apart from the wall that shall be depicting a wall body). A bit of timber board might
even be used as a base to assist your mannequin.
• It is strongly recommended that the primary construction is constituted of Balsa wooden; nevertheless, you might select to make use of an
different materials in the event you deem it to be appropriate.
• The supplies that you’d must undertake the mission can be found from most passion and crafts retailers,
and a few is perhaps out there from a ironmongery shop.
• Additionally, you will want to find out the amount of materials required. It’s possible you’ll choose to purchase a whole sheet and
reduce from this sheet slightly than buy particular person items. For instance, reduce your rafters from Three-4mm thick
balsa wooden sheets.
• Use pins and/or glue to assemble the mannequin and make connections.
• You’ll have to decide the kind of roof that you simply want to assemble depending on the design that you simply
have chosen. Suggestion: to fulfill evaluation standards, it is suggested that you simply use an L-shaped design
UO Building 1
as a result of it lets you show required options of the mission resembling hips, ridge, gable, and valleys
together with ceiling joists, hanging beams, trimmers, purlins, struts, strutting beams, below purlins and facia
boards.
• In case you have chosen to indicate a bit with a truss this must be detailed with data.
• The size of the wall ought to present high and backside plates, studs, jamb studs, noggings, and lintels over
openings.
INTERPRETING AND READING PLANS
Evaluation shall be based mostly upon consistency to plans, depicting all related wall and roof framing members and their
correct placement and neatness of presentation. It’s possible you’ll wish to watch the next. It takes you thru the
course of of studying tips on how to learn typical building drawings.
• Lynda.com course (2hr 20min, Newbie) – Rogers J no date, Building Administration: Readings Drawings
& Specs, course, Lynda.com .
You might also come throughout the roof and wall body phrases that you’re not acquainted with in the course of the course and when
studying the plans for the development of your wall and roof mannequin. As would occur when working in the business,
you’re required to analysis these phrases. A great useful resource that you simply might be able to borrow from a library or confer with
the eReading tab on the high of the course web page, or buy is the ebook: Wilkie, G 2011, Constructing your Personal House A
complete information for Homeowners-Builders, third Version, New Holland Publishers, Australia.
FURTHER ADVICE
• Check with the learnonline course web site below sources for evaluation exemplars.
• Evaluation 2 Half A and B are to be submitted collectively as a one-word doc.
• Please use the course Q and A discussion board to debate any challenges that you’re going through whereas developing the
mannequin. The educating group and your fellow friends will be capable of help you in this discussion board. The extra questions
and pictures posted and mentioned, the higher the training for everybody.